Service Manual - Wet Chemical Ansul 429656AS. Standard - ships in 2 business days with $100.00 minimum purchase of Ansul products or 10 business days for smaller orders. ANSUL RED LINE Fire Extinguishers at Daytona Speedway First Line of Defense RED LINE cartridge operated fire extinguishers are the premium firefighting units preferred by safety directors worldwide in high fire-risk industries such as chemical, petro-chemical, oil and gas, mining, aviation, and power generation.

Ansul A-101 Off Road Fire Suppression Systems

Features

• FM Approved
• Manual and/or Automatic Detection and Actuation
• Extreme Temperature Option
• Low Profile Tank Option
• Rugged Construction
• Approved For Use in Under Ground Mines For Either Manual or Automatic Agent Release (Automatic Detection System Incorporating MSHAApproved ANSUL® CHECKFIRE® MP-N Detection System)
• CE Marked

Application

The ANSUL A-101 Fire Suppression System is an automatic or manual fire suppression system using FORAY® (monoammonium phosphate base) dry chemical agent for Class A, B, and C fires. The fire suppression system is designed for use on large, off-road type construction and mining equipment (such as large excavators/shovels, draglines, haul trucks, wheeled loaders), underground mining equipment, and specialty vehicles (such as slag, pot and/or slab carriers, tunnel boring machines, solid waste handling equipment, and forestry vehicles). These types of equipment have large volumes of oils and hydraulic fluids under pressure.

The fire system described is a suppression system only and is not designed or intended to extinguish all fires. It is extremely important that alternative firefighting equipment be available in case the system does not totally extinguish a fire.

If an automatic fire detection and actuation system has not been supplied or has been disconnected, system actuation and discharge will not occur unless the fire suppression system is manually actuated.

Description

The ANSUL A-101 Fire Suppression System is a pre-engineered, cartridge-operated dry chemical system with a fixed nozzle distribution network. It is approved by Factory Mutual (FM).

The system is capable of automatic detection and actuation and/or remote manual actuation. When a fire is detected, the A-101 system is actuated either manually or automatically, operating the pneumatic actuator. The pneumatic actuator ruptures a seal disc in the expellant gas cartridge. This, in turn, pressurizes and fluidizes the dry chemical extinguishing agent in the tank, ruptures the burst disc when the required pressure is reached, and propels the dry chemical through the network of distribution hose. The dry chemical is discharged through fixed nozzles and into the protected areas, suppressing the fire.

Ansul System Installation Manual

The automatic detection portion of the fire suppression system incorporates electric detection, either linear detection wire or spot detection.

In addition, Triple IR flame detectors added to the linear or thermal detection circuit can be utilized for quick fire detection response.

The fire suppression system is capable of providing local application hazard protection for mobile equipment and industrial hazards. In certain industrial hazards, total flooding can be used.

The basic system consists of: Dry Chemical Agent Storage Tank(s), Expellant Gas Cartridge, Distribution Hose and Nozzles, Manual/Automatic Actuator, Automatic Detection System, and Accessories.

Agent Storage Tank – The agent storage tank(s) consists of a welded steel tank, gas tube, brass or aluminum fill cap, agent outlet sealed bursting disc assembly, and instruction nameplate. Tanks for temperature ranges of +32 °F to +120 °F (0 °C to +49 °C) and the LT-A-101-10, have a cartridge receiver and an expellant gas cartridge located on the side of the tank. Low profile and extreme temperature model tanks, (–65 °F to +210 °F (–54 °C to +99 °C)), have a separate cartridge/ pneumatic actuator assembly which is connected to the tank by a high pressure 1/4 in. hose. The tank is painted with a red enamel paint. Agent storage tanks are available in six sizes (10 lb., 20 lb., 30 lb., 50 lb., 125 lb. and 250 lb.).

Mounting Bracket (10, 20, 30, 50) – Tank mounting bracket consists of a rugged, welded steel back plate and clamp arm assembly. The bracket is designed to retain and protect the agent storage tank in the normal hostile environment that these systems are installed in. The bracket is painted red enamel and can be mounted by bolting or welding.

Mounting Ring (125, 250) – The mounting ring for the 125, 250 tanks is fabricated of 1/2 in. steel. The ring conforms to the outline of the tank assembly bottom. The ring can be welded to the mounting surface and the tank can then be bolted to the ring, using the pre-threaded holes in
the ring.

Expellant Gas Cartridge – The expellant gas cartridge is a spun high pressure cartridge containing either carbon dioxide for temperature ranges of +32 °F to +120 °F (0 °C to +49 °C), or nitrogen for extreme temperature ranges of –65 °F to +210 °F (–54 °C to +99 °C).

Distribution Hose and Nozzles – The distribution piping (hose) network is designed to properly distribute the dry chemical to the nozzles. To survive the vibration found on mobile equipment, hose is used to distribute the dry chemical. In the A-101 pre-engineered system; hose sizes, maximum and minimum hose lengths, and number of nozzles are predetermined. There are three types of nozzles available for the A-101 system. Each type of nozzle has been designed and tested for various applications and area of coverage. Nozzle blow-off caps are available to keep the nozzles free of dirt and grease.

Manual/Automatic Actuator(s) – The manual actuator consists of an actuator body, a nitrogen cartridge, and a mounting bracket. Two types of manual actuators are available: Remote type and Dashboard type. The Remote type uses either the “S” style bracket or the cartridge guard style enclosure. The Dashboard type uses the “L” or “S” style mounting bracket. When the manual actuator is operated by hand, gas supplied from the nitrogen cartridge is released into 1/4 in. actuation hose. This nitrogen pressure then operates the pneumatic actuator that punctures a larger expellant gas cartridge (either carbon dioxide or nitrogen) and this fluidizes and propels the dry chemical from the agent storage tank. Automatic actuators (a component of the automatic detection system) operate the same way, except they can be operated automatically by the detection system.

Automatic Detection System – Three automatic detection systems are available for use with the ANSUL A-101 fire suppression systems: CHECKFIRE Series I, CHECKFIRE SC-N, or the CHECKFIRE MP-N. Mounting location temperatures for the control modules for the detection
systems are as follows:

CHECKFIRE Series I : –40 °F to +140 °F (–40 °C to +60 °C)

CHECKFIRE SC-N : –40 °F to +140 °F (–40 °C to +60 °C)

CHECKFIRE MP-N : +32 °F to +120 °F (0 °C to +49 °C)

Installation, Replacement & Recharging in the Mid-South

Fire extinguishers are an integral part of your building’s fire protection plan. At State Systems Inc., we’ve partnered with ANSUL, a leading manufacturer of fire extinguishers. If you need fire extinguisher service or training for your ANSUL units or wish to have ANSUL fire extinguishers installed, contact us today. For service in the Mid-South, including Tennessee, Mississippi or Arkansas, call us at 901-531-6550.

ANSUL fire extinguishers are:

• Easy to operate
• Powerful and portable
• Compliant with NFPA 10
• Available in multiple extinguishing agent types
• Economically priced
• Engineered to last

They also come with a six-year limited manufacturer’s warranty.

Types of Extinguishers from ANSUL

The ANSUL line of fire extinguishers can protect you and your company, no matter the use or the cause of fire. They offer three lines of fire extinguishers:

ANSUL SENTRY® offers a line of portable, dry chemical, carbon dioxide and water-stored pressure fire extinguishers.

Ansul Fire Extinguisher Maintenance Manual

• SENTRY Dry Chemical (for general purpose)
• SENTRY Industrial Dry Chemical (for harsh, corrosive environments)
• SENTRY Carbon Dioxide (for Class B fires, including flammable liquids and gases)
• SENTRY Water (for Class A fires)

ANSUL CLEANGUARD line is rated for Class A, B and C fires and will not damage sensitive or irreplaceable materials, equipment and facilities.

• CLEANGUARD non-magnetic extinguishers (for magnetic imaging rooms, semiconductor, semiconductor fabrication facilities and similar applications)

ANSUL K-GUARD extinguishers are made for restaurants and commercial kitchens and designed to fight some of the toughest fires, including hot grease, cooking oil and fat fires. The K-GUARD extinguisher can protect against fires on or within:

• Fryers
• Griddles
• Ranges
• Broilers
• Char-broilers
• Woks
• And more

Our Services in the Mid-South

At State Systems Inc., we strive to provide full-service fire protection to protect your life and property. Part of that starts with your fire extinguishers. We provide installation, inspection, training, and replacement of ANSUL fire extinguishers. Learn more about our services below or call us at 901-531-6550 to request an estimate.

ANSUL Fire Extinguisher Installation

There are many fire extinguisher brands out on the market, but at State Systems Inc. we only sell and install the best in the industry, including those manufactured by ANSUL.

We will also help you choose the best fire extinguisher for you based on the extinguishing agent, coverage area and specific application you need. Whether you need a Class A, B or C for your office building or a Class K for your restaurant, trust our years of expertise to determine the best fit for you.

ANSUL Fire Extinguisher Training

At State Systems, we know that even the best fire extinguishers are basically useless if you don’t have people who know how to use them. That’s why we provide annual hands-on fire extinguisher training that complies with Occupational Health and Safety (OSHA) standards. Fire extinguisher training improves employee confidence, which makes them more effective at fighting fires. If you have ANSUL fire extinguishers installed in your Mid-South building but need to schedule training for your employees, call us today!

We offer fire extinguisher installation services and training in these cities and the surrounding areas:

Ansul Fire Extinguisher Maintenance Manual Download

• Arkansas (AR): Blytheville, Forrest City, Helena-West Helena, Jonesboro, Marion, Paragould and Wynne
• Mississippi (MS): Batesville, Clarksdale, Cleveland, DeSoto County, Greenville, Greenwood, Grenada, Hernando, Horn Lake, Olive Branch, Oxford, Senatobia, Southaven, Tunica and Tupelo
• Tennessee (TN): Arlington, Bartlett, Collierville, Dyersburg, Fayette County, Germantown, Jackson, Lakeland, Martin, Memphis, Millington, Tipton County and Union City